Latch Release Lever, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the clip -2- out of the release lever -1- slightly -arrow A- using a small screwdriver.
-- Pull the operating lever toward the rear -arrow B- to release the hood and hold it in this position.
-- At the same time, pull the release lever so it is level with the center of the vehicle and out of its mount -arrow C-.