Hood, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the washer nozzles. Refer to WASHER NOZZLES, REMOVING AND INSTALLING .
-- Remove the grommet -2-.
-- Guide out and free up the wiring harness -1- and washer fluid hose -3- from the hood.
-- Mark the installation position of the hinge on the hood.
-- Remove the gas-filled strut from the hinge. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
-- Remove the nuts -arrows- from the hinge.
-- Remove the front lid.