Terminal 40 Wire Junction 2 -TV67-, REMOVING AND INSTALLING, 5-SEATER: Removing

-- De-energize the 48V system. Refer to 48V SYSTEM, DE-ENERGIZING .

-- Remove the luggage compartment floor trim panel. Refer to OVERVIEW - LUGGAGE COMPARTMENT FLOOR .

-- Release the retainer in direction of -arrow A- and open the cover -1- in direction of -arrow B-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -7 and 8- and free up the wires -4 and 5-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- and free up the wires -1 and 2-.

-- Remove the bolt -3-.

-- Remove the wire junction -6-.

Wire Junction Bracket, Removing and Installing 

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer in direction of -arrow A- and open the cover -1- in direction of -arrow B-.

-- Remove the bolt -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Move the wire junction -2- with the wires connected to the side.

-- Free up the wire holder -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3- and then the bracket -2-.