Terminal 40 Wire Junction -TV66-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- De-energize the 48V system. Refer to 48V SYSTEM, DE-ENERGIZING .
-- Release the latch in direction of -arrow- and open the cover -1-.
-- Remove the nuts -3, 4 and 5- and free up the wires -1, 2 and 6-.
-- Remove the bolts -arrows-.
-- Remove the 48V system wire junction -1-.