Suppressor -C24-, REMOVING AND INSTALLING, 48V SYSTEM: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Release the catches in direction of -arrows- and remove the suppressor.
-- Disconnect the connector -1-.
-- Release the retainers in direction of -arrows- and remove the cover -1-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Push the suppressor -2- upward and out of the housing -1- from below in direction of -arrow- and remove it.
 Courtesy of AUDI OF AMERICA, LLC
|