Component Location Overview - Terminal 30 Wire Junction -TV2- and Terminal 30 Wire Junction 2 -TV22
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Relay and Fuse Panel 1 -SR1-
- Relay and Fuse Panel 2 -SR2-
- Nut
- 3 Nm
- Mount
- For relay and fuse panel
- Nut
- 16 Nm
- Nut
- 16 Nm
- Positive Cable
- From the battery
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Terminal 30 Wire Junction 2 -TV22-
- Removing and Installing. Refer to Terminal 30 Wire Junction 2 -TV22-, REMOVING AND INSTALLING .
- Nut
- 7.5 Nm
- Cap
- Suppressor -C24-
- Removing and Installing. Refer to Suppressor -C24-, REMOVING AND INSTALLING .
- Terminal 30 Wire Junction -TV2-
- Removing and Installing. Refer to Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING .
- Nut
- 3 Nm
- Quantity: 3
- Positive Cable
- To starter, generator