Sliding Bar Ball, Installing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Camshaft Spacer: T40191

Fig 1: Camshaft Spacer T40191
Courtesy of AUDI OF AMERICA, LLC
: T40191/1
Protective Eyewear

Installing

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

Fig 2: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in direction of -arrow A- using the : T40191/1 and hold.

-- Push the sliding bar -3- in direction of -arrow B-.