Cam Adjustment Valve 1 -N205- /Exhaust Cam Adjustment Valve 1 -N318-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the seals and O-rings after removal.
Seal installation position: smaller inner diameter outward.

-- Oil the O-rings on the sealing surface to the valve for the camshaft adjustment with engine oil.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Additional procedures depending on the model: Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING .