Door Handle Trim, Removing And Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hook Tool:T40207
Removing
-- Remove the door handle. Refer to DOOR HANDLE, REMOVING AND INSTALLING .
Front trim:
-- Mount the : T40207 on the opening -arrow- on the trim -1-.
-- Pry the trim off the door handle -2- and remove.
Rear trim:
-- Guide the : T40207 into the opening and release the catch -1- with a rotational movement.
-- Remove the cover -2-.
Installing
Install in reverse order of removal and note the following:
-- Insert the trim until it engages audibly.