Engine Hood Contact Switch -F266-, REMOVING AND INSTALLING
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the front latch. Refer to LATCH, REMOVING AND INSTALLING .
-- Lift the retaining tab -1- -arrow A-.
-- Disengage the contact switch -2- from the latch -3- -arrow B- and remove.
Installing
Install in reverse order of removal and note the following:
- The guide pins -4- on the contact switch must inserted correctly in the front latch.