Tire Pressure Monitoring Control Module -J502-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Component location: on the rear subframe.
-- Versions with sway stabilization: release the retainer -arrow-, disengage the Tire Pressure Monitoring Control Module -J502- -item 1- from the subframe and remove.
-- Disconnect the connector -2-.
-- Release the catch -arrow- and remove the Tire Pressure Monitoring Control Module - J502- -item 1- toward the rear.