Vehicles With Coil Springs, Checking The Curb Weight Position For Axle Alignment, AUDI Q8: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
The curb weight position must be checked before beginning an axle alignment on vehicles with coil springs. Explanation of the curb weight position. Refer to TEST REQUIREMENTS, AUDI Q8 .
Determine the dimension -a-, vehicles without wheel housing extension
-- Determine dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing -1- as shown.
Determine the dimension -a-, vehicles with wheel housing extension
-- Determine dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing -1- as shown.
- The fender/wheel housing lower edge -arrow- is a measuring point, not the wheel housing extension lower edge -2-.