LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Wheels, Tires, Wheel Alignment (Suspension, Wheels, Steering)) >> 44 Wheels, Tires, Wheel Alignment >> Axle Alignment >> Standard Vehicle Height For Axle Alignment On Vehicles With Air Suspension, Checking >> Standard Vehicle Height For Axle Alignment On Vehicles With Air Suspension, Checking, AUDI Q8 >> Dimension -a- Overview

Dimension -a- Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Chassis Distance between the center of the wheel and the lower edge of the fender/wheel housing
  Front axle Rear axle Tolerance between the right and left
Specified size. Refer to (1). Tolerance Specified size. Refer to (1). Tolerance
1BK 473 mm ± 7 mm 484 mm ± 7 mm Less than or equal to 10 mm
2MA 473 mm ± 7 mm 484 mm ± 7 mm Less than or equal to 10 mm
2MB 473 mm ± 7 mm 484 mm ± 7 mm Less than or equal to 10 mm
(1) The specified size is based on the standard vehicle height.
CAUTION:

Premature wear due to incorrect axle alignment.

- Only perform the axle alignment if the vehicle is at standard vehicle height.

scientia non olet · About LEMON Manuals