Fuel Tank Pressure and Temperature Sensor -GX49-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel tank removed. Refer to the appropriate Service Information .
-- Release and disconnect the connector -1-.
-- Remove the Fuel Tank Pressure and Temperature Sensor -GX49- -2- at the fuel tank. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, DISCONNECTING .