Wheel Centering Seat, Protecting Against Corrosion
WARNING: This page is about a different car, the 2021 Audi SQ7, 2021 Audi Q7, 2020 Audi SQ7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Applies to light-alloy and steel wheels
When a wheel is changed, the wheel centering seat should be sprayed with Wax Spray to prevent corrosion between the wheel centering seat and the rim. Refer to Parts Information.
-- Remove the wheel.
-- Thoroughly clean the centering seat on the wheel hub and the centering surface on the rim.
CAUTION:
Brakes can become contaminated while driving and thereby result in poor braking.
- Only wax the rim centering.
Always make sure that only centering -arrow- is waxed and not rim contact surfaces. As a consequence, the brakes would become contaminated while driving and thereby result in poor braking.
-- Apply wax in area of centering -arrow- using a brush.