LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires And Wheel Alignment >> Rim Information >> Valve, Removing And Installing >> Valve, Removing And Installing, Metal Valve >> Removing

Valve, Removing And Installing, Metal Valve: Removing

WARNING: This page is about a different car, the 2021 Audi SQ7, 2021 Audi Q7, 2020 Audi SQ7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the Tire Pressure Monitoring Sensor --.

-- Remove the nut -1- from the metal valve.

Fig 1: Identifying Metal Valve
GWWN44-10443Courtesy of AUDI OF AMERICA, LLC

-- Counterhold -arrow- the metal valve using a retainer (for example 2 mm spiral bore) while doing so.

scientia non olet · About LEMON Manuals