Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi SQ7, 2021 Audi Q7, 2020 Audi SQ7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the cap -1- flush against the opening in the aluminum rim from the outside.

NOTE:

Do not tilt the cap.

-- Press on the cap so that it is secure inside the opening in the aluminum rim.

-- Make sure the cap is secure inside the aluminum rim.