Vibration, Road Test, Performing Before Balancing
WARNING: This page is about a different car, the 2021 Audi SQ7, 2021 Audi Q7, 2020 Audi SQ7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
If a vehicle comes to the workshop with the complaint "vibration", a road test must be performed before balancing the wheels.
CAUTION:
Personal risk and risk for other drivers while test driving.
- Always observe the local applicable law.
- Secure testing equipment.
- That way, information about the type of vibration can be obtained.
- Observe at which speed range the disturbance takes place.
-- Raise the vehicle on the platform immediately after the road test.
-- Mark the component location on the tire.
| Component location of tire | Identification with... |
|---|---|
| Left front tire | LF |
| Right front tire | RF |
| Left rear tire | LR |
| Right rear tire | RR |
-- Remove the wheels from the vehicle.
-- Balance the wheels.