Spoiler Cover, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- The vehicle and the spoiler cover must be at room temperature.
- The adhesive surfaces must be free of dirt and grease.
-- Remove adhesive residue from the body.
-- Clean the painted side of the adhesive surface with Cleaning Solution:D 009 401 04 and let dry.
-- Fold back the end of the protective film, or attach a pulling aid to the protective film.
-- Apply and press the spoiler cover -1- on.
- The clips -arrows- must click into place.
-- Remove the protective film from the adhesive tape -2- and press the cover on.
- Vehicle resting time is at least 30 minutes at room temperature.