Spoiler Blade, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Clean the adhesive surface using the Cleaning Solution:D 009 401 04 .
-- Remove the tape peel-off backing, and apply the foam seal -2- on the adjusting mechanism.
-- Clip in the left and right adjusting mechanisms -1- in the spoiler -3-.
-- Adjust the spoiler blade. Refer to SPOILER, ADJUSTING .