B-Pillar Trim, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Mount the B-pillar trim -1- on the B-pillar and push it upward. The guide -2- must fit into the mount -3-.
- When positioning and pushing upward, the recess -arrows- on the B-pillar trim must include the door seal on the left -5- and right -4-.
-- Press on the B-pillar trim.