Ignition Coils, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model preliminary work may be required. Refer to IGNITION COILS, REMOVING AND INSTALLING .

-- Insert the :T10530 in the ignition coil opening -1-.

Fig 1: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC

-- Turn the knurled nut -2- clockwise -arrow- until the puller is clamped.

-- Remove the ignition coil carefully vertically -arrow- using the :T10530 .

Fig 2: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC