Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Slide Hammer Set - Hook:VW771/37 from Slide Hammer Set:VW771
- Puller - Unit Injector - Adapter 3:T10055/3
- Injector/Combustion Chamber Seal Tool Set - Sliding Hammer:T10133/3 from Injector/Combustion Chamber Seal Tool Set:T10133C
- Thrust Piece:T40357
- M10x20 Threaded Pin
Tools, Preparing
-- Assemble the :T10133/3 with :VW771/37 to so this use the :T10055/3 and threaded pin -1-.