Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the seal after removal.
Check the vacuum hoses for damage before assembling and replace if necessary.

-- If removed, install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Install the housing for the Map Controlled Engine Cooling Thermostat -F265-. Refer to HOUSING FOR Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .