Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Engine oil drained. Refer to ENGINE OIL .

Depending on the model, preliminary work may be required. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Disconnect the connector -arrow- from the Oil Level Thermal Sensor -G266-.

Fig 1: Oil Pan Lower Section - Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wires.

-- Place a cloth underneath to catch any escaping engine oil.

-- Loosen and remove the bolts in the following sequence: -18 to 1-.

-- Loosen and remove the oil pan lower section carefully from the bonding.