Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to OIL SEPARATOR, REMOVING AND INSTALLING .
Cylinder Bank 1 (Right):
-- Remove the crankcase ventilation hoses -1 and 3- by pressing the release buttons on both sides.
-- If necessary, free up the wiring harness.
-- Remove the bolts -arrows- and the oil separator -2-.
Audi RS6 / RS7 / A8 / RSQ8 / SQ8 / SQ7, Cylinder Bank 2 (left):
-- Remove the crankcase ventilation hoses -2- by pressing the release buttons on both sides.
-- Remove the bolts -arrows- and the oil separator -1-.
Audi S8, Cylinder Bank 2 (Left):
-- Remove the crankcase ventilation hoses -1 and 3- by pressing the release buttons on both sides.
-- Remove the bolts -arrows- and the oil separator -2-.