Cam Actuator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to CAM ACTUATOR, REMOVING AND INSTALLING .
-- Push the upper section of the noise insulation carefully to the side.
- To not damage the cam actuator, do not use any removal tools.
-- Remove the bolts -arrows- and remove the corresponding cam actuator -1- by hand and at the same time without tilting.