Bumper Cover Mount, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lower section of the bumper cover. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING .
-- Free up the connector if equipped.
-- Remove the nuts -1-.
-- Tilt the rear bumper cover mount -2- downward -arrow- ; this will loosen the catch -3-.
-- Disengage the front mount bracket -4- on the fender.