Overview - Exhaust Door Control Unit
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Muffler
- Spring
- Installation position. Refer to Fig 1.
- Exhaust Door Control Unit
- Exhaust Door Control Unit -J883- right
- Exhaust Door Control Unit 2 -J945- left
- Removing and installing. Refer to Exhaust Door Control Unit -J883-, REMOVING AND INSTALLING .
- Installation position. Refer to Fig 1.
- After replacing components, perform the adaptations listed in "0001 - Mechanical Engine, Functions", using the Vehicle Diagnostic Tester.
- Bolt
- 8 Nm
Installation Position of the Exhaust Door Control Unit.
-- Bring the spring -3- at the exhaust door -2- in installation position.
-- Place the exhaust door control unit -1- onto the exhaust door -arrows-.