A/C Compressor Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles excluding RSQ8 / SQ8 / SQ7:

-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

Audi RSQ8 / SQ8 / SQ7:

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .

Continuation for All Vehicles:

Fig 1: A/C Compressor Bracket -1- - Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.

Fig 2: A/C Compressor Bracket -1- - Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC