Generator -C- RIBBED BELT, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the A/C compressor ribbed belt from the vibration damper. Refer to A/C COMPRESSOR RIBBED BELT, REMOVING AND INSTALLING .
CAUTION:
Risk of destroying a used ribbed belt by reversing the running direction.
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- To release the tension of the tensioner ribbed belt -2- pivot counter-clockwise -arrow- using the Screwdriver-Insert, Torx, T55:VAS5350/8 -3-.
-- Remove the ribbed belt -1- and release the tension on the tensioner.