Starter Generator Ribbed Belt, Removing And Installing
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .
-- Disconnect the radiator fan connector -1-.
-- Disconnect the connector -2- for the radiator fans and remove from the bracket.
All additional procedures are described. Refer to RIBBED BELT, REMOVING AND INSTALLING .
Tightening Specifications
- Refer to OVERVIEW - BUMPER COVER .