A/C Compressor Ribbed Belt TENSIONER, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left bottom air duct pipe. Refer to LOWER AIR DUCT PIPES, REMOVING AND INSTALLING .
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Place the :VAS6208 underneath.
-- Lift the clamp -2- and loosen the hose clamp -1-, and remove the coolant hose.
All additional procedures are described. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .