High-Mounted Brake Light, Removing And Installing, A6 Sedan: Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- The entire high-mounted brake lamp must be replaced if an LED is faulty.
-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.
-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly -arrows-.