Differential Lock Control Module -J187-, REMOVING AND INSTALLING, AUDI Q7 AND Q8 WITH "quattro sport"
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- The ignition is off.
-- Remove the luggage compartment floor covering.
-- Unclip the Differential Lock Control Module -J187- -1- from the bracket.
-- Release the connector -A- and disconnect it from the Differential Lock Control Module -J187-.
-- The Differential Lock Control Module -J187- is installed in the reverse order.
- If the Differential Lock Control Module -J187- was replaced, then additional work is necessary. Refer to ADDITIONAL WORK AFTER REPLACING Differential Lock Control Module -J187- .