INPUT SHAFT SEAL, REPLACING, 0D3 "quattro sport": Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use: VW 391

Fig 1: Puller - Multiple Use VW391
Courtesy of AUDI OF AMERICA, LLC
Puller - Unit Injector: T10055

Fig 2: Identifying Puller T10055
Courtesy of AUDI OF AMERICA, LLC
-2- Puller - Unit Injector - Adapter 2: T10055/2
Two M 8 x 30 Bolts
Seal Installer - Hollow Shaft: T10380

Fig 3: Identifying Thrust Piece - T10380-
Courtesy of AUDI OF AMERICA, LLC
Seal Installer - Input Shaft: T40222

Fig 4: Assembly Tool T40222
Courtesy of AUDI OF AMERICA, LLC
Guide Sleeve: T40222/1
Sealing Grease: G 052 128 A1
Inductive Heater: VAS 6414

Fig 5: Identifying Inductive Heater VAS 6414
Courtesy of AUDI OF AMERICA, LLC
or
Commercially Available Hotplate and Digital Thermometer: VAS 6519

Fig 6: Identifying Digital Thermometer VAS 6519
Courtesy of AUDI OF AMERICA, LLC