Gear Oil Level, Checking, 0DB, 0D2 And 0G1 / 0G2
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray
-- Remove the oil filler plug -arrow A- to check the gear oil.
The oil level is correct when the rear final drive is filled up to the lower edge of the oil fill hole.
- Transmission fluid specification. Refer to CAPACITIES .
-- Install the plug -arrow A- and tighten it. Tightening specification Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0DB, 0D2 AND 0G1 / 0G2 .