OVERVIEW - HOUSING, 0B0 "quattro ultra"

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Final Drive Housing (0B0 "quattro ultra")

Courtesy of AUDI OF AMERICA, LLC

Housing
- With all-wheel drive clutch
Housing
- With differential
Centering Pin
- Quantity: 2
Magnet
- Always clean
Bolt
- Tightening specification and sequence. Refer to Fig 2.

Tightening specification and sequence of housing bolts

Fig 2: Rear Final Drive Housing Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

	Bolt	Tightening specification
1.	1 to 9	Install all the way by hand
2.	1 to 9	30 Nm
3.	1 to 9	Re-tighten to 45°