Starter Generator Ribbed Belt, Removing And Installing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the bolts -arrows- and push the front coolant pipe 1 -item 4- to the side.
All additional procedures are described. Refer to RIBBED BELT, REMOVING AND INSTALLING .
Tightening Specifications
- Refer to OVERVIEW - COOLANT PIPES
- Refer to OVERVIEW - NOISE INSULATION .