Radiator Fan -V7-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- The securing components for the wires must correspond to the production series. Refer to Parts Information.
-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .
-- Disconnect the connectors -1 and 2- for the radiator fans and remove from the bracket and free up.
-- Free up the wiring harness.
-- Remove the bolts -1 or 2- and remove the corresponding radiator fan.
TIP:
If the counter-balancing clamps are missing from the fan wheel, the imbalance may produce noise.