Fan Shroud, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the Transmission Fluid Cooling Pump -V478-. Refer to Transmission Fluid Cooling Pump -V478-, REMOVING AND INSTALLING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Figure.