Right Coolant Pipe On Transmission, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the right subframe shield upper section. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Place a cloth underneath to catch leaking coolant.
-- Clamp off the coolant hoses using the :3094 .
-- Loosen the hose clamps -arrows- and remove the coolant hoses.
-- Remove the bolts -1 and 2- and remove the coolant pipe.