Cam Actuator, Installing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Installing
Additional procedures:
-- If removed, install the oil separator. Refer to OIL SEPARATOR, REMOVING AND INSTALLING .
-- Connect the coolant line with the connector coupling. Refer to Fig 1.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Tightening Specifications
- Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .
- Refer to OVERVIEW - LOCK CARRIER .