Camshaft Timing Chain, Removing From Camshafts, Cylinder Bank 1 (Right): Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .

-- Remove the reinforcement brace. Refer to OVERVIEW - LOCK CARRIER .

-- Release the left and right catches in direction of -arrows- and remove the retaining pin -1- for the radiator upward.

Courtesy of AUDI OF AMERICA, LLC

-- Carefully push the radiator module as far forward as possible and secure using suitable service equipment.

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the upper right pressure pipe. Refer to UPPER PRESSURE PIPE, REMOVING AND INSTALLING .

-- Remove the bolts -1-.

Fig 1: Component Location: on the Front of the Engine, Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Push the wiring duct -2- upward.

All additional procedures are described under: CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .