Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Impact Puller: T10133/3 from Injector/Combustion Chamber Seal Tool Set: T10133C
- Camshaft Adjustment Pins: T40060 (with the engine installed)
- Locating Pins: T40116
- Hand drill with plastic brush insert
- Protective eyewear
- Sealant. Refer to the Parts Information.
- M8x25 Bolts (quantity 2)