Tilting Mechanism Guide Rail, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check if all gliding pieces -1- with springs -3- are on the tilting mechanism guide -2-.
- Unlike the gliding pieces -1- -A, C and D arrows-, there is no spring -2- installed on the gliding piece -1- -arrow B-.
-- Insert the bottom of the tilting mechanism guide -4- into the mount for the guide rail -arrow-. While doing so, the arm -2- must engage in the opening -3-.
-- Press the entire length of the tilting mechanism guide into the inner guide rail. The sliding pieces -1- must slide into place at the same time.