Sunroof Shade, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Insert the slide block -1- into the front sun shade arch -2- and on the sun shade material -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Tension the sunroof shade with the Locking Pin (3 pc.): T40011 still inserted in the securing hole a total of six turns -arrow-.

Fig 1: Tensioning Sunroof Shade

Courtesy of AUDI OF AMERICA, LLC

TIP:

The sunroof shade mount only fits in one position in the sunroof frame.

-- Insert the sunroof shade in the pretensioned condition in the sunroof frame.

-- Perform an adaptation. Refer to Sunroof Shade Motor -V260-, ADAPTING .