Steering Gear End Positions, Adapting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- If the steering gear were replaced on an Audi Q7, then the end position of the steering gear must be readapted.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
-- If the "Control Module, Replacing" program for the Power Steering Control Module -J500- is completed, then also select the "Steering Gear End Positions, Adapting". Refer to DIAGNOSTIC ENTRIES .
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.