Sway Stabilization Control Module 2 -J1096-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Re-energize the 48 Volt system. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Complete the "Control module, replacing" program after replacing the Sway Stabilization Control Module 2 -J1096-, using the => .