LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Rear Suspension) >> 42 Rear Suspension >> Stabilizer Bar >> Stabilizer Bar, Removing And Installing >> Stabilizer Bar, Removing And Installing, Versions With Sway Stabilization >> Installing

Stabilizer Bar, Removing And Installing, Versions With Sway Stabilization: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Re-energize the 48 Volt system. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- After installation of a new stabilizer bar with sway stabilization, select the "Rear Axle Sway Stabilization, Starting" program. Refer to DIAGNOSTIC ENTRIES .

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.

scientia non olet · About LEMON Manuals